SkyStarsRC Fly Stack H7 3-6S 30x30 Stack/Combo (H7 FC / KM60 32Bit 60A 4in1 ESC) - Dual Gyro

Check out our other 30x30 Stacks, and our SkystarsRC collection!

Key Features of SkyStars H743 HD Flight Controller

• • High - performance STM32H743VIT6 MCU with 480MHz, 1MB RAM, and 2MB Flash
• • Dual BMI270 Gyros for precise flight control
• • BMP280 Baro for accurate altitude sensing
• • Betaflight OSD for easy monitoring
• • 8 sets of UARTs for various connections
• • 8x PWM outputs
• • 1x I2C
• • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• • USB Type - C(USB2.0)
• • 2x JST - SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
• • 1x JST - SH1.0_6pin connector (R1/G/R6/T6/G/10V)
• • Dual Camera Inputs switch
• • VTX 10V/Vbat filtered power ON/OFF switch
• • Supports DJI FPV OSD via any spare UART
• • Vbat Input: 7~25V (2~6S LiPo)
• • BEC: 5V 2A Continuous (Max 3A)
• • LDO 3.3V: Max 250mA
• • Firmware: Betaflight - SKYSTARSH7HD, Ardupilot : SKYSTARSH7HD
• • Mounting: 30.5 x 30.5mm
• • Dimensions: 39.5 x 39.5 x 7.8 mm
• • Weight: 10.1g

Key Features of SkyStars KM60 60A BLHeli_32 4 - in - 1 ESC - 30x30

• • High - current output: 60A continuous x4, 80A burst x4
• • Supports 3 - 6S battery for flexible power options
• • Supports multiple control signals like Dshot1200, Dshot600, Dshot300, PWM
• • ESC telemetry supported
• • No output BEC
• • BLHeli_32 firmware
• • Dimensions: 41x46
• • Weight: 18g
• • Mounting holes: 30.5x30.5 M3

Includes

• 1x SkyStarsRC 30x30 Fly Stack H7 Single Gyro FC / KM60 BLHeli - 32 45A 3 - 6S

This SkyStarsRC Fly Stack is designed for RC hobbyists. It's a great choice for those who love to build and fly RC planes or drones. The flight controller and ESC combination comes with a 30x30 mounting pattern. The flight controller has dimensions of 39.5 x 39.5 x 7.8 mm and weighs 10.1g, while the ESC has dimensions of 41x46 and weighs 18g. It's easy to install and use, allowing you to enhance your RC flying experience with its powerful features.