Features
- Exceptional over - current ability: Using high - quality PCB materials and advanced production processes, it can handle larger currents.
- Stable support for 6S LiPo battery: Equipped with new Toshiba Mosfet and imported materials, along with advanced SMT technology.
- Superb heat dissipation: The CNC hollow aluminum alloy shell helps keep components cool.
- Superior control performance: Factory - flashed with the latest AM_32 firmware, supporting telemetry functions.
Specifications
SKYSTARS F7HD Pro4 Flight controller:
- MCU: STM32F722RET6 216MHz
- Gyroscope: MPU6000
- Baro: Bmp280
- OSD: Betaflight SPI OSD DJI HD OSD(UART6)
- Black box: 16MB
- 6x Uarts: UART 1/2/3/4/5/6
- 4x PWM outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- USB Type - C(USB2.0)
- 1x JST - SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
- 1x JST - SH1.0_6pin connector (10V/Gnd/TX6/RX6/Gnd/Sbus)
- VTX 10V/Vbat filtered power ON/OFF Pit switch
- Any spare UART supports DJI FPV OSD
- LED: 4 LED independent pads, support WS2812 programming lamp output.
- Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built - in inverter, which can actually be installed in any spare UART.
- Input voltage: 3 - 6S
- BEC: 5V/10V 3A max dual - channel BEC supports stable power supply on the sky side of DJI O3
- LDO 3.3V: Max.250mA
- BetaFlight firmware: SKYSTARSF722Pro
- INAV firmware: SKYSTARSF722HD
- Installation size: 30.5x30.5mm. The installation hole is M4 and supports shock column installation.
- External size 39x39mm
- Flight control weight: 6.9g
- Flight control onboard voltage sensor
AM60 AM_32 60A 32Bit 3 - 6S 30.5mm 4in1 ESC:- Input voltage: 3 - 6S LiPo
- Con.Current: 60A
- Peak Current: 70A¡Ý 10S
- Firmware: AM_32
- Support: Dshot 600/1200
- Mounting hole: 30.5X30.5 mm/M3
- BEC: No
- Product size: 41x46x7.6mm
- Weight: 18g
Includes
- 1x SkyStarsRC F722 HD PRO4 3 - 6S 30x30 Stack/Combo (F722 FC / KM60 AM - 32 32Bit 60A 4in1 ESC) - MPU6000
- 8x Silicon grommets M4 to M3
- 2x JST - SH1.0_8pin cable, 4cm
- 1x JST - GH - 6P cable for DJI port, 10cm
Wiring Diagram
The SkyStarsRC F722 HD PRO4 3 - 6S 30x30 Stack/Combo is a great choice for RC hobbyists. It's a powerful flight control system with an F722 FC and a KM60 AM - 32 32Bit 60A 4in1 ESC. It can handle 3 - 6S batteries. The flight controller has an installation size of 30.5x30.5mm, weighs 6.9g, and the ESC has a mounting hole of 30.5X30.5 mm/M3 and weighs 18g. Ideal for smooth and reliable RC flights.
