BetaFPV has upped the ante with their new 1 Watt Express LRS transmitter! • Enhanced Cooling: With a built-in cooling fan and included heat sink, it cools better than 500mW versions, ensuring worry-free daily use. • Wide RF Output Power Options: Choose from 25mW, 50mW, 250mW, 500mW, or 1W. • High Packet Refresh Rates: Select from 50Hz, 150Hz, 250Hz, or 500Hz. Check out our ELRS gear, RC Transmitters and all our BetaFPV products! Note: Please assemble the antenna before power on. Otherwise, the PA chip in the Micro TX module will be damaged permanently. Note: Please DO NOT use 3S or above battery to power up the TX module via XT30 port. Otherwise, the power supply chip in the TX module will be damaged permanently. Note: Please do not turn on all DIP switches at the same time. BETAFPV Micro TX Module ELRS V2.0.0 firmware is published. The firmware does not include the Binding Phrase. So please make sure the receiver works on officially major release V2.0.0 protocol and no Binding Phrase set. Support 5D buttons and the OLED menu with the official ELRS 2.0.0 release. The color of the LED changes automatically according to the system status. Other new and various features are fully synchronized with the official ELRS 2.0.0. When entering OLED menus page with long pressing, the connection between RF TX module and receiver works normally. Please do not change the Pkt Rate, otherwise, you must re-power the receiver. You could all use the ELRS offical firmware V2.0-RC2 now, but lost the function of OLED and Joystick. We will work with the ELRS dev team and make the ELRS official firmware support the full function of the Micro TX Module. For the milestone, OLED will be supported in the V2.1 officially. https://github.com/BETAFPV/ExpressLRS User manual of How to Flash Firmware of ELRS RX/TX.
This BetaFPV 1 Watt ELRS Micro 2.4GHz RC Transmitter Module is perfect for RC enthusiasts. It's great for flying drones or other RC vehicles. The module is lightweight and easy to handle. Technical specs include packet refresh rates of 50Hz, 150Hz, 250Hz, 500Hz; RF output power of 25mW, 50mW, 250mW, 500mW, 1W; 2.4GHz ISM frequency bands; an included heatsink; a Type C USB Port; and backpack function support.
