All PRE-ORDERS shipping ASAP!!
Get ready for an exhilarating FPV flying experience with the Crux 35! This ultra-lightweight 3.5Inch drone is perfect for freestyle and racing. • Weighing only 87g for the analog version, it offers maximum maneuverability. • Equipped with Happymodel's EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller, it ensures a smooth flight. • The V2 version comes with a CrazyF411 ELRS flight controller, providing easy receiver updates.
Choose between ELRS 2.4GHz and FrSky for your receiver and enjoy the thrill of FPV flying!
Check out our other pre-built quads, as well as the rest of our HappyModel selection!
Features
- Bind tutorial for ELRS
- Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone
- HD video transmission and analog video transmission are optional
- Integrated ExpressLRS UART receiver
- High efficiency EX1404 power system
- Can be equipped with Naked Gopro or SMO4K
Specifications
- Weight: 87g
- Brand: Happymodel
- Wheelbase: 150mm
- Dimensions: 130mmx130mmx45mm
- Receiver option: UART ExpressLRS 2.4GHz
HappyModel Flight Controller (ELRS Version)
- Input Voltage: 2-4S LiPo
- MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
- Gyro: BMI270 or ICM42688P (SPI control)
- ESC Connections: Yes
- Firmware: CrazybeeF4DX
- Current Sensor: Yes
- Mount pattern: 25.5x25.5mm (M2)
- Dimensions: 32x28x9mm
- Weight: 5g
- Built-in 20A Blheli_s ESC each
- Built-in Betaflight OSD(SPI Control)
- Built-in UART ExpressLRS 2.4GHz receiver
- Built-in 5V 1A BEC
Onboard ESC:
- MCU upgraded to EFM8BB21
- Power supply: 2-4S LiPo/LiPo HV (7v/17v)
- Currents: 20A continuous peak 25A (5 seconds)
- Support BLHeliSuite and ESC-Configurator programmable
- Factory firmware: Bluejay 0.18.1
- Firmware target: F_H_40_48_v0.18.1
- Support DSHOT150/DSHOT300/DSHOT600
- Default protocol: DSHOT300
HappyModel EX1404 3500KV Motor
- Mode: EX1404
- Kv: 3500Kv
- Input Voltage: 3-4S LiPo
- Configuration: 9N12P
- Motor Dimensions: ¦µ17.8mm x 17.6mm
- Stator Dimensions: ¦µ14mm x 4mm
- Shaft Diameter: 1.5mm
- Mounting Pattern: ¦µ9mm
- Weight: 9g
HappyModel Propellers
- Propeller Diameter: 3.5 inch
- Pitch : 2
- Blades : 3
- Material : Poly Carbonate
- Weight : 1.5g
- Hub Diameter : 10mm
- Hub Thickness: 4.7mm
- Shaft :1.9/1.5/1.9mm
- Adaptor Rings : NO
Caddx Ant Camera
- Image Sensor: 1/3' CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC and PAL(switchable)
- MENU: Support
- IMAGE: 4:3 or 16:9
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio: >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm/F2.5
- Minimum illumination: 0.001Lux
- Auto Gain Control: YES
- BLC: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14x14mm
- Wide Power Input: DC 3.7-18V
- Work Temperature: -20°C~+60C
- Work Humidity: 20%~80%
- Weight: 1.7g
Happymodel OVX303 5.8G analog VTX or OVX306 5.8G analog VTX
- Input Voltage: 5V
- RF Output Power: 25-300mW
- Antenna Connector: U.Fl
- Power/Video Connection: Solder Pads
- OVX303 Stack Size: 16x16mm, 20x20mm, 25x25mm
- OVX306 Stack Size: 25x25mm
- Weight: 0.9~1g
Includes
- 1x HappyModel BNF Crux35 V2 3.5' Analog Quad - Choose version
- 1x 5D-OSD menu board
- 1x Screw Driver and Screw Set
- 8x HQProp T3.5X2X3Grey (4cw+4ccw)
- 1x Buckle Velcro for battery
The HappyModel BNF Crux35 V2 3.5 Analog Quad is a lightweight and powerful drone designed for FPV freestyle and racing enthusiasts. With a weight of only 87g for the analog version, it offers maximum maneuverability. The drone is equipped with Happymodel's EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller, ensuring a smooth and thrilling flight experience. The V2 version comes with a CrazyF411 ELRS flight controller, providing easy receiver updates. Choose between ELRS 2.4GHz and FrSky for your receiver and enjoy the excitement of FPV flying. Whether you're a beginner or an experienced pilot, the Crux35 V2 is the perfect choice for your next FPV adventure.
