NewBeeDrone AcroBee75 HD O3

• Compact Powerhouse: The AcroBee75 HD O3 BNF is a tiny yet mighty drone. It's the first whoop with a G4 flight controller and built-in ELRS2.4 receiver, working great with Dshot600 and bi-directional Dshot. • Indoor Filming Pro: As the smallest and lightest HD whoop with a complete DJI O3 unit, it offers amazing agility and nearly 3.5 minutes of flight time. Our tuning ensures smooth indoor filming in self-level and acro modes. Optimize visuals by turning on DJI RockSteady in goggle settings. Not for outdoor or windy use. • Smallest O3 HD Whoop: At 75mm, it sets a new standard as the smallest O3 HD whoop, compared to 85mm and 80mm models. The only HD Micro whoop board with a G4 processor, it has dual-bearing motors for less friction and 3-blade Azi propellors for great air-grab and stability. Master-tuned for smooth flight and no jello in videos. Explore and film indoor spaces like never before in HD! A must-have for indoor professionals and hobbyists.

We found the best ratio between the size of drone and its weight distribution. Without DJI O3, the drone can fly up to 8 minutes. Up to 3 minutes with DJI O3 and battery. Choose between 3D printed battery mounts or strap.

We ensure that you get the best material and components that are available so you can rely on the drone without troubleshooting or breaking. All parts are available separately as replacements. Additional flexibility with SLS Nylon prints allow cameras to be changed or updated if needed.

Assembly or tuning not required. Save time and energy so you can focus on your footage. Drone comes with built-in ExpressLRS and ready to pair. Built-in blackbox records data for tuning. Configure to DJI PNP on Betaflight if needed. Don't be afraid of messing up on customization. Reset to factory default (with our tunes and dump files) in one click if something is not right.

Our support team in the United States are here to help. US customers enjoy Unlimited Frame Warranty from our site. For other countries, please ask your local store to see if they offer replacement.

Specifications:

Drone Size: 75mm
Flight Controller: BeeBrain HD G4 Flight Controller ExpressLRS (ELRS) 2.4G
Frame: Cockroach75 Brushless Frame
Motors: Flow 0804 12000kv Double Ball Bearing Brushless Motor
Propellesr: Azi (Tri-Blade) Micro Propellers 40mm - 1.0mm Shaft
HD VTX & Camera: DJI O3 Air Unit
Canopy: NewBeeDrone Acrobee75 HD O3 Canopy
Total Weight without battery: 70.19g
Total Weight with battery: 98.24g - 99g

Recommended battery:
Tattu 450mAh 7.6V High Voltage 95C 2S1P Lipo Battery Pack with XT30 Plug - Long Pack
Tattu R-Line 550mAh 7.4V 95C 2S1P Lipo Battery Pack with XT30 Plug

BeeBrain BLV4 HD G4 Flight Controller ELRS2.4G Specifications:

• MCU: STM32G474
• ESC Firmware: Z-H-40 - Bluejay 0.19.2 48kHz.
• ESC Specifications: 1 channel 20A ESC
• Receiver: NBD ExpressLRS 3.0 Diversity (non-SPl)
• Receiver Antenna: 1x BeeT-Antenna 1x 2.4G receiver antenna
• Flight Controller Weight:7.4g (including antenna and XT30 Battery connector)
• Flight Controller Size: Outer dimensions :29 x 29 x 7.6 mm
• Flight Controller Holes: 25.5 x 25.5 mm
• Battery Input: 1-2S
• BEC:10V 2A for DJI O3 (under 2S power only)
• BEC£º5V 2A
• UART1: Free
• UART2: TX & RX for EXPRESSLRS 3.0 receiver
• UART3: Free
• UART4: Free
• Flight time with Tattu 450mAh 2S battery is 3:00min (at 7v)

Firmware:

BeeBrain BLV4 HD Betaflight 4.4.0 firmware with tune

All new Firmware can be found on NewBeeDrone Github page

What's included:

1x NewBeeDrone AcroBee75 HD DJI O3 BNF
2x Extra HD Canopies
1x Extra Battery Strap (for other sized batteries)
4x Azi 40mm Propellers

Warning: This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.

*Note: For outdoor flying, RockSteady is required in order to get the best picture quality(On DJI goggle Menu). The PID tune are base on the current setup. If you change any setting on the drone and it is acting weird, please flash the newest firmware

Video:

Review Video:

The NewBeeDrone AcroBee75 HD O3 is perfect for indoor filming. Ideal for professionals and hobbyists who want to explore and film indoor spaces in HD. It's a compact powerhouse with a 75mm frame, great for maneuvering indoors. Weighing 70.19g without battery and 98.24 - 99g with battery, it offers agility and a decent flight time. Comes with built-in features for easy use and includes extra parts like canopies and propellers.