All products containing batteries must be shipped by a ground shipping method.
Get ready to soar with the HGLRC Draknight 2 2S Beginner's Dream RTF Kit! This is the ultimate kit for beginners. It's small but powerful, powered by 2S batteries, and perfect for both indoor and outdoor flying. The radio works with various simulators, so you can practice even more! Don't miss out on this amazing opportunity to start your flying adventure today!
Check out our other pre-built quads, as well as our whole HGLRC product line!
Features
- Beginner-Friendly Flight Controller
- Powered by 2S LiPo Batteries
- Complete FPV Setup
- 2' Compact Design
- Durable Build
Specifications
REMOTE CONTROLLER
- Common Operations: Frequency Pairing, Power Adjustment, Joystick Calibration
- Switch Design: Mix and Match (Three-Stage and Two-Stage)
- Model: HGLRC C1 Radio Controller w/ Dongle - ELRS
- Third-Party Compatibility: Receivers and Tuners
- USB Interfaces: USB-A, USB-C (Dual Interfaces)
- Radio Frequency Module: Built-in 500mW
- Remote Control Distance: Extended
- Wireless Dongle Compatibility: Yes
- Operation Procedures: Simplified
- Signal Transmission: Stable
- Type: Handle Control
- Screen: Not Required
- Level: Entry-Level
- Value: High-Value
DARKNIGHT DRONE
- Built-in image transmission: 0-25-100-400mW (adjustable)
- Weight: 44.3g (excluding the weight of the receiver)
- Recommended propeller: Gemfan2023 propeller
- Flight control firmware: HGLRCF411SX1280_15A
- Firmware: BF HGLR-HGLRCF411SX1280_15A
- Built-in receiver: UART ExpressLRS 2.4G
- Maximum supported paddle: 2 inches
- ESC protocol: Dshot150/300/600
- ESC firmware: Z-H-30 (Blheli_S)
- Master control: STM32F411
- Continuous current: 12A
- Input voltage: 2-4S Lipo
- Peak current: 15A (5s)
- BEC output: 5V/1.5A
- Wheelbase: 91.8mm
- Specter 1003 Motor
- Motor: 10000KV (2s)
- Size: 104x104mm
- Type: 52 inch rack
DONGLE
- Built-in ELRS Maximum Supported Frequency: 250MHz
- External Receiver Support Protocol: CRSF Protocol
- ELRS Firmware Upgrade Method: Wifi or USB Plug
- ELRS Firmware Name: HGLRC 2.4GHz
- Receiving Distance: More Than 200m
- ELRS Firmware Version: ELRS 3.0
- Size: 74x21x12.5mm
- Working Voltage: 5V
- Interface: USB-C
- Weight: 9.5g
Includes
- 1x HGLRC Draknight 2' 2S Beginner RTF Kit
- 1x VR100 5.8GHz Analog Transmission Goggles
- 1x 82mm Philips 1.5 Screwdriver
- 1x Darknight Instruction Manual
- 1x 3.5mm Conversion Cable
- 1x M2 Hexagonal L Wrench
- 1x USB-C Charging Cable
- 1x 915MHz FPC Antenna
- 1x C3 Charger Manual
- 1x C1 Remote Control
- 1x 2' Darknight Drone
- 1x Charge Power Cord
- 1x Propeller Extractor
- 1x Wireless Dongle
- 1x Mirco Data Cable
- 2x 720mah Battery
- 1x C3 Charger
- 8x Propellers
- 1x Sticker
- 1x Case
- 1x Card
The HGLRC Draknight 2 2S Beginner's Dream RTF Kit is perfect for beginners looking to start their flying adventure. It's small and powerful, making it great for indoor and outdoor use. The radio works with simulators for extra practice. The drone weighs 44.3g (excluding receiver) and has a 104x104mm size. It comes with everything you need to get started right away.
