Build Video:
Premium Controller with Quality Parts and Features
• Features F7 Processor and 45Amp BLheli32 for top-notch performance.
• NewBeeDrone Smoov-certified design supports 3-6S batteries, ideal for freestyle or racing.
• Delivers reliable quality for an exhilarating drone experience.
Designed to support the DJI Air Unit.
• Enables DJI Air Unit compatibility with 6S batteries by providing 9V 16W clean power.
• Despite DJI Air Unit's 4S limit, this stack unlocks new possibilities.
Plug-and-Play. No need to solder tiny wires.*
• Comes with wire bundles for easy connection of Flight Controller, ESC, and DJI Air Unit.
• *Only for full DJI systems. If you use Crossfire, you still need to solder.
Cricket200 Flight Controller F7 Spec:
- MPU6000 Gyro
- STM32F722 216mhz
- 9V 2A 18W Design for DJI FPV Air Unit
- 5V Camera Power
- BetaFlight OSD
- 31.5x27 CB with 20x20 mounting holes, weight: 5.85g
- 6 UARTS. UART1 (INVERTER FOR SBUS)
- UART2 (FREE)
- UART3 (INVERTED TELEMETRY)
- UART4 (Free)
- UART5 (Smart Audio)
- UART6(Free)
- Built-in 4 IN 1 ESC socket(including ESC telemetry, External current sensor) JST1.0 8Pin
- Plug and plug with NBD Infinity200 ESC. Also compatible with most of the ESC on the market.
- Built-in solder pads for ESC signal output and power
- Printed layout instructions ON the board - no need for instructions!
- DJI FPV Air Unit socket (use UART1 and UART6)
Cricket200 ESC Spec:
- LiPo Power input: 3S-6S
- ESC Programming: BLHeli32
- Cont.Current: 45Ax4
- Burst Current: 55Ax4
- Weight / Size: 13.0g / 39x29.5x8mm
- Mounting holes: 20x20mm
- Signal plug JST1.0 8pin plug with NBD Infinity200FC
- Solder pad ready for signal and power.
- Heatsink design
- 8 Layer PCB with 2Oz Copper
- Smoov performance design by Team NBD
Includes:
- 1x Cricket200 4 in 1 ESC BLHeli32 45A
- 1x Cricket200 flight controller F7
- 8x Short Grommets 8x Long Grommets
- 5x Steel Screw 25mm
- 13x Nylon Nuts
- 470uf 35v Electrolytic capacitor
- 1x Cricket200 FC to Cricket200 ESC cable 30mm
- 1x Cricket200 FC to Cricket200 ESC cable 50mm
- 1x Cricket200 FC to Cricket200 ESC cable 85mm
- 1x Cricket200 FC to DJI Air module cable 70mm
Firmware target name on official Betaflight GUI: NBD_CRICKETF7
The NewBeeDrone Cricket200 Stack (ESC+FC) is a must-have for drone enthusiasts. Whether you're into freestyle flying or high-speed racing, this premium controller with top-quality parts and features will take your drone experience to the next level. It features an F7 Processor and 45Amp BLheli32, along with NewBeeDrone Smoov-certified hardware design that supports 3-6S batteries. The Cricket200 Stack is designed to support the DJI Air Unit, making it compatible with 6S batteries by providing 9V 16W clean power. It's also plug-and-play, so you don't need to solder tiny wires (except for Crossfire). The Cricket200 Flight Controller F7 has an MPU6000 Gyro, STM32F722 216mhz, and more. The Cricket200 ESC has LiPo Power input from 3S-6S, BLHeli32 programming, and other great specs. It comes with a bundle of cables and various parts. Size and weight details: The Flight Controller F7 has dimensions of 31.5x27 CB with 20x20 mounting holes and weighs 5.85g. The ESC is 39x29.5x8mm and weighs 13.0g.
