NewBeeDrone BeeBrain BLV4 AIO Flight Controller with ELRS 2.4G

Warning!
The BeeBrainBLV4 OSD might not be compatible with third party cameras. If you plan to use it for a customized build, be aware it only supports the following cameras:

How to Video:
Internal ELRS Rx Firmware flashing:

NewBeeDrone BeeEye Camera
Runcam Nano4

Specifications

• Powerful STM32F411 MCU
• ESC Firmware: S-H-40 - Bluejay, 0.16, 48kHz.
• ESC Specifications: 4 channel 12A ESC
  
• ESC Connector: JST-1.0 3Pin
• NBD OSD (Betaflight OSD Compatible)
• Lightweight design at only 6.5 grams (including antennas and battery connector)
• Compact size with outer dimensions 29 x 29 x 7.6 mm
• Holes: 25.5 x 25.5 mm
• Battery input: 1S
• Connector: PH2.0
• UART2 TX and RX for onboard EXPRESSLRS receiver (SX1280)
• UART1 TX and RX free
• VTX with adjustable power: 5mW-25mW-SmartMAX. SmartMAX automatically adjusts VTX power according to board temperature. When the board temperature rises, VTX power is reduced. When temperature is low, maximum output power can reach 400mW

Includes

• 1 x BeeBrain BLV4 Flight Controller
• 4 x Grommet
• 4 x Screw
• 1 x Receiver T-Antennas
• 1 x Receiver Antennas
• 1 x VTX Antenna
  
  

Firmware:
1. ELRS Receiver firmware can be found here. Vendor choose NewBeeDrone
2. BeeBrain blv4 ELRS Betaflight 4.4 firmware

All new firmware can be found on our Github Page

Note: Binding process. Power up the drone 3 times, on the third time you plug in power, the ELRS Receiver will enter binding mode. We're still working on the ELRS firmware to make it possible to enter bind mode by just clicking the boot button. Expect this update soon.
Check out the video below CiottiFPV shows you how to enter bind mode. - Thanks bro for showing this. lol

This NewBeeDrone BeeBrain BLV4 AIO Flight Controller is perfect for drone enthusiasts. It's lightweight at only 6.5 grams (including antennas and battery connector) and has a compact size with outer dimensions 29 x 29 x 7.6 mm. Use it for your custom drone builds and enjoy its features like the adjustable VTX power that adapts to temperature changes.