NewBeeDrone Prusa MK3S Print Bed mount Quad Bearing Upgrade Kit

Upgrade your Prusa MK3S print bed for enhanced stability! Our kit provides a better solution than a 3-bearing mount. Feel the difference as your print bed locks in securely. • Features a 6mm Carbon fiber Quad Bearing mount. • Includes 4 Misumi LM8UU Linear Bearings and 4 Bearing holders. • Comes with 10 M3 Steele screws for bearing holder. Installation is a breeze. Just follow these simple steps: 1. Remove the heat bed screws and take out the heat bed, keep the original screw and stand-off. 2. Unscrew 6 locknut to release the original mount from the bearing, unscrew the belt holder. 3. Cut the rod holder zip ties to release the rod and remove the original bearing, then clean the rod with a microfiber cloth. 4. Install the Misumi LM8UU bearing on the carbon fiber mount, secure it with the metal holder and screw. 5. Install both rods into the bearing and mount it back to the frame, install the belt holder back to the carbon fiber mount. 6. Put on the stand-off from step 1, the carbon fiber plate has a stand-off sink hole for easy positioning. Put on the heat bed and use the step 1 screw to lock it in. 7. Redo the First layer calibration, set the value to 0 and adjust during calibration. Now you're all set! Enjoy smooth printing with our upgrade kit. Compare the original base with the carbon fiber base for even better results. Related Video:

This upgrade kit is perfect for Prusa MK3S users who want to improve the stability of their print bed. Whether you're a hobbyist or a small business owner looking to enhance your 3D printing experience, this kit is for you. The kit includes a 6mm Carbon fiber Quad Bearing mount, 4 Misumi LM8UU Linear Bearings, 4 Bearing holders, and 10 M3 Steele screws for bearing holder. It's easy to install and will give your print bed a more secure and stable hold.