The Holybro Kakute H7 is a game-changer! It's got Bluetooth for easy connectivity, dual 4in1 ESC ports, an HD camera plug, barometer for stable flights, OSD for vital info, 6 UARTs for flexibility, a MicroSD card for data storage, 5V & 9V BEC, and an easy soldering layout. It supports DJI HD and powers your FPV Air Unit & Caddx Vista with its 9V regulator. With 6 UART ports and inversion, you can log unlimited Blackbox data. The BetaFlight OSD shows info on your FPV display, and the barometer aids autonomous flight. It also has an LED & buzzer pad, and an I2C pad for external GPS/Magnetometer.
Check out all our 30x30 Stacks and the rest of our HolyBro selection!
Features
- This V1.3 now has USB-C, 9V 3A BEC for VTX, and JST-SH connector for VTX port.
Specifications for HolyBro Kakute H7 V1.3 FC
- MCU - STM32H743 32-bit processor running at 480 MHz
- IMU - MPU6000
- Barometer - BMP280
- OSD - AT7456E
- Onboard Bluetooth chip - ESP32-C3
- SpeedyBee IOS & Android App Compatible
- Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm).
- 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
- 9x PWM Outputs (8 Motor Output, 1 LED)
- 2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible)
- 1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista & Air Unit)
- Battery input voltage: 7V to 42V
- BEC 5V 2A Cont.
- BEC 9V 3A Cont
- USB Type-C
- Mounting - 30.5 x 30.5mm/ÆÓ4mm hole with ÆÓ3mm Grommets
- Dimension - 35x35mm
- Weight - 8g
Specifications for Tekko32 F4 4in1 50A ESC
- Continuous Current: 50A x4
- Burst Current: 60A x4
- Supports 4-6S battery
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- No output BEC
- BLHeli_32 firmware
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120 (V1.9 Version)
- Dimensions: 48x37x6mm / Weight: 13.8g
- Mounting holes: M4 30.5x30.5mm (M3 grommets included)
Firmware Targets
- BetaFlight: KakuteH7 (v4.2.11 and above)
- INAV: KakuteH7 (4.0.0 & above) SD card support added in 4.1.0.
- ArduPilot: KakuteH7 (4.2.0 & above)
Includes
- Holybro Kakute H7 V1.3 Tekko32 F4 50A 4-6S 30x30 Stack/Combo (H7 FC / 50A F4 32bit 4in1 ESC)
- 1x Wiring Kit
Wiring Diagram
This Holybro Kakute H7 V1.3 Tekko32 F4 50A 4-6S Stack/Combo is perfect for drone enthusiasts. It comes with a flight controller and ESC that work great together. The flight controller has all the bells and whistles for smooth flights. It's got Bluetooth, ports for various components, and sensors for stability. The ESC can handle high currents and different battery types. It's easy to install and use. The dimensions of the flight controller are 35x35mm and it weighs 8g. The ESC is 48x37x6mm and weighs 13.8g. Whether you're a beginner or an experienced flyer, this combo will enhance your drone experience. Use it for capturing amazing aerial footage or just having fun flying.
