All PRE-ORDERS shipping ASAP!! PNP in stock and shipping same day!
HappyModel is an amazing company, bringing you high-quality whoops for FPV enthusiasts. Check out HappyModel's first whoop on an 85mm frame. It features an X12 series flight controller, EX1103 KV11000 motors, and Gemfan Hurricane 2023 tri-blade propellers, delivering an amazing performance for a smooth flight.
Choose between PNP (No RX) and BNF (ELRS SPI 2.4)
Don't miss out on all our pre-built quads and Happymodel products!
Features
- • High-performance X12 5-IN-1 AIO flight controller with 2.4G ELRS V2.0 and OPENVTX
- • VTX Power up to 400mw
- • ELRS V2.0 (Default), upgradable to ELRS V3.0
- • EX1103 KV110000 motors for powerful thrust
- • CaddxFPV Ant FPV camera for great visuals
- • Smooth and powerful flight experience
- • Compatible with 1S-2S Lipo/LIHV battery
- • 3D Printed Camera Lens Protector for added protection
User Manuals
Specifications
- Brand Name: Happymodel
- Motor: EX1103 KV11000
- AIO: X12 5-IN-1 AIO flight controller
- Camera: CaddxFPV Ant FPV camera
- Prop: Genfan 2023-3 propellers
- Weight: 42.7g
- Input Voltage: 1-2S
- Wheelbase: 85mm
- Size: 120mmx120mmx50mm
Motor Specifications
- Model: EX1103 KV11000
- Configuration: 9N12P
- Stator Diamter: 11mm
- Stator Length: 3mm
- Shaft Diameter: ¦µ1.5mm
- Motor Dimension(Dia.xLen): ¦µ13.5mmx15.5mm
- Weight(g): 3.8g
- No.of Cells(Lipo): 1-2S
Propeller Specifications
- Weight: 0.88g
- Material: PC
- Pitch: 2.3inch
- Props Dia: 52.17mm
- Center Thickness: 5mm
- Center Hole Dia: 1.5mm
Flight Controller Specifications
- MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM20689 or ICM42688P(SPI connection)
- Mount hole size: 25.5mm x 25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw
- Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
- Built-in voltage detection
- Built-in current sensor
Onboard 4in1 ESC
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Firmware target: Z_H_30
- Default protocol: DSHOT300
- Support Bluejay firmware
Onboard SPI ELRS 2.4GHz Specifications
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V2.0
- RF Frequency: 2.4GHz
- Antenna : SMD antenna
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Could flash FC firmware to support ExpressLRS v3.0 TX module
PNP Version Specifications
- Full UART1 for external Receiver
- Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
- IR1 pad(invert RX1) used for SBUS input
Includes
- 1x HappyModel BNF Mobula8 1-2S Brushless Analog Whoop - Choose Your Receiver
- 1x Gemfan Hurricane 2023 tri-blade propellers (4CW+4CCW)
- 1x Screw Driver
- 1x Extra camera canopy
This HappyModel BNF Mobula8 is perfect for FPV enthusiasts. With a 85mm frame, it's compact and easy to fly. Weighing only 42.7g, it's lightweight for agile maneuvers. Choose between PNP (No RX) and BNF (ELRS SPI 2.4) versions. Great for beginners and pros alike looking for an exciting FPV flying experience.
