Get ready to dominate the freestyle scene with the GEPRC BNF Mark5 HD Quad! This quad is designed specifically for freestyle enthusiasts, featuring a squashed X arm design for maximum agility. Its unique shock absorbing structure design reduces vibrations and resonance, providing a stable operating environment for the electronic system. The aluminum alloy side plates not only look stunning but also reduce weight and add more endurance. Don't miss out on this amazing quad! • Squashed X arm design for maximum agility • Unique shock absorbing structure design for a stable operating environment • Aluminum alloy side plates for a stunning look, reduced weight, and more endurance Make sure to check the ELRS Version! Gopro case available separately. Check out all our pre-built quads, and all our GEPRC selection! Specifications: - Input Voltage: 6S - Wheelbase: 225mm - Top plate: 2.5mm - Bottom plate: 2.5mm - Arm: 5mm - Charge connector: XT60 - Motor: 2107.5 1960Kv - Weight: 385.5g SPAN F722-HD-BT FC: - MCU: STM32F722 - IMU: MPU6000(SPI) - OSD: BetaFlight OSD w/AT7456E chip - Blackbox: 16Mb Flash - BEC: 5V, 9V - LC Filter: Yes G50A ESC: - MCU: STM32F051K86 - Max Continuous Current: 50A - Max Burst Current: 55A - BEC: No - Current Sensor: Yes Caddx Air Unit: - Operating Temperature: 32 to 104 F (0 to 40 C)Input Power: 7.4-17.6V - Transmitter Power: FCC/SRRC: <30dBm CE: <14dBm - I/O Interface: USB-C, MMCX, 3-in1 Port, MicroSD - Output Power: 25mW3200mW/500mW/700mW - Video Transmission: 28ms Low Latency - Dimensions: - Air Unit: 44x37.8x14.4mm - Camera:20.7x19x19mm - Flight Control System: BetaFlight - Max Transmission Range: 4km - Coaxial Cable Length: 100mm - FOV: 150(D); 122(H); 93(V) - Goggle Compatibility: DJI - Closed Loop 4-in-1: Yes - Frequency Channels: 8 - Shutter: Rolling Shutter - Sensor: 1/3.2' CMOS - Effective Pixels: 4 M - Image: 720p/120fps - Video Format: MP4 - Video: 1080p/60fps - Lens: 2.1mm, F/21 - ISO: 100-256000
The GEPRC BNF Mark5 HD 6S 5 Quad with Caddx Air Unit Micro is the ultimate choice for freestyle enthusiasts. With its squashed X arm design, it offers maximum agility for impressive aerial maneuvers. Ideal for those who love to push the limits of freestyle flying, this quad is perfect for beginners and experienced pilots alike. Featuring a unique shock absorbing structure, it provides a stable operating environment for the electronic system, ensuring smooth flights. The aluminum alloy side plates not only add a sleek look but also reduce weight, enhancing endurance during long flights. In terms of technical specifications, the quad has a wheelbase of 225mm, with a top plate and bottom plate both measuring 2.5mm, and an arm thickness of 5mm. It weighs 385.5g, powered by a 6S input voltage. The Charge connector is XT60, and it comes with a 2107.5 1960Kv motor.
