All PRE-ORDERS shipping ASAP!! ELRS in stock and shipping same day.
Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
Get ready for an amazing flight experience with the Pavo 20! Weighing just 150g, it's the perfect 2' DJI O3 cinewhoop for indoor and outdoor adventures. Compatible with the Caddx Vista and RunCam Link, it features an innovative PA12 thickened cross-section whoop duct for unbeatable thrust. The redesigned camera mount offers superior protection and a stylish COB LED strip.
The Pavo 20 can carry a DJI O3, Caddx Vista, and RunCam Link. With 3S power using 1103 8500KV motor, it can perform powerful moves with its engineered duct for more trust in flights.
Check out pre-built quads, and the rest of our BetaFPV gear!
Features
- • Ideal for indoor and outdoor flights, weighing under 150g
- • Integrated injection molding HD VTX mounting bracket for easy installation
- • Innovative PA12 thickened cross-section whoop duct for more thrust
- • Open-ended battery strap slot for 2 - 3S batteries
- • New F4 2-3S 20A AIO FC V1 for HD digital VTX
Born For DJI O3
The Pavo20 is a micro cinewhoop for an immersive flight experience indoors and outdoors. It's great for 4K/1080P aerial cinematography. With a 90mm wheelbase and powerful system, its unique whoop duct boosts thrust and has COB LED strips for creative shots.
Camera & VTX System
The Pavo20 supports various HD VTX. The DJI O3 Air Unit offers up to 1080P with dual-band transmission. The Caddx Vista supports up to 720P with low latency. The RunCam Link is compatible with popular FPV systems. The customized HD VTX mounting bracket has a split design for easy DIY installation.
Pavo20 Frame Kit
The Pavo20 Frame Kit has a 90mm wheelbase and a crash-proof PA12 thickened whoop duct. Its reinforced cross-section design is strong and blast-resistant, working well with the power system for more thrust.
Precise Security For HD VTX
The camera side panel and 4-point fixation hole design protect the lens and allow easy ND filter installation. The insert copper nut design makes installation easier. The open-ended battery strap slot fits a wide range of batteries, and side-limitation slots keep the battery stable during flights.
Note: 2-4S is for the Pavo20 frame, this Pavo20 quadcopter only supports 3S batteries.
The vibration problems and solutions encountered by Pavo20 are consistent with Pavo Pico. Please refer to Pavo Pico DJI O3 Vibration Problem.
Moreover, the integrated injection molding HD VTX mounting bracket has an insert copper nut for easy installation, with half-thread screws for no screw tightness adjustment and better anti-vibration for stable HD images. It can also be adapted to the Pavo Pico.
Click to watch the installation guide video for the DJI O3 Air Unit.
Power System
Our 1103 | 8500KV motor offers ultimate power and speed for thrilling flights. Designed for 2'' props, it's great for tight spaces. It supports 3S 450mAh~650mAh batteries for a balance of flight time and performance. With up to 5 minutes of flight time, you can capture amazing aerial footage non-stop.
Flight Controller
Our F4 2-3S 20A AIO FC V1 has an ESC with a 25A peak current for stable FC operation. The 9V 2A BEC power supply ensures stable DJI O3 HD VTX operation at low battery voltage. It includes a DJI O3 6-pin PMU for easy HD VTX connection. It has a 16MB black box, supports GPS and external receivers, and has a redesigned solder pad layout and USB connector for easy installation and maintenance.
Pavo Series COB LED Strip
The Pavo Series COB LED Strip is a 5V-powered, 560 mm*4 mm LED strip. It increases visibility for safe night flights and adds unique lighting effects. Choose from single or mixed colors for a personalized flying experience.
ND Filter for DJI O3 Camera
The BETAFPV ND Filter for DJI O3 Camera is made for the Pavo20 and Pavo Pico. It reduces light entering the camera lens for slower shutter speeds or wider apertures. Lightweight and made of high-quality optical glass for clear images and easy installation.
Specifications
- Color: Black
- Flight Time: 5min
- FC: F4 2-3S 20A AIO FC V1
- Battery: 3S 450mAh~650mAh
- Props: GF 2015 2-Blade Props
- Motor: 1103|8500KV Brushless Motor
- Weight (No Battery): 54.51g (DJI O3)
- HD VTX: Supports DJI O3 Air Unit
- FPV Camera: Supports DJI O3 Camera
- Wheelbase: 90mm
Includes
- 1x BetaFPV BNF Pavo20 Pico HD 3S 2' Cinewhoop for DJI O3 (without O3 Unit) - Choose Your Receiver
The Pavo 20 is a lightweight cinewhoop, perfect for both indoor and outdoor flying. Weighing just 150g, it's ideal for hobbyists looking for an exciting flying experience. With a 90mm wheelbase, it offers great maneuverability. It's compatible with DJI O3, Caddx Vista, and RunCam Link, and features an innovative PA12 thickened cross-section whoop duct for powerful thrust. The camera mount is redesigned for protection and style. It supports 3S 450mAh - 650mAh batteries, providing up to 5 minutes of flight time. The integrated injection molding HD VTX mounting bracket makes installation easy. Get ready for amazing aerial cinematography with the Pavo 20!
