Get ready to soar with the Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3' Frame Kit! Specifically designed for Freestyle FPV enthusiasts, this kit offers an exhilarating flying experience.
- Collaborated with Expert: Developed in partnership with FPV expert Joshua Bardwell, ensuring top-notch quality and performance.
- Lightweight & Rigid: Mono-plate arms provide enhanced rigidity while keeping the weight down, perfect for high-speed maneuvers.
- Versatile Compatibility: Compatible with DJI O3, DJI O4 Air Unit or Walksnail systems (sold separately), along with analog cameras like the Caddx Ratel 2.
The frame is crafted from high-quality Lumenier carbon fiber and can accommodate lightweight performance electronics such as the Lumenier AIO and XILO 1404 motors. It comes with all the necessary hardware components for building the frame and includes a step-by-step guide by Joshua Bardwell.
Note:
- The receiver is not included. A receiver compatible with your controller is required.
- This frame fits only the DJI O4 Air Unit and is currently incompatible with the DJI O4 Air Unit Pro. Analog cameras such as the Caddx Ratel 2 are also compatible.
- This is a Full DIY Build Kit with assembly required.
Make sure to check out our other 3' Frames and our Lumenier product selection!
Video
Features
- Developed in collaboration with FPV expert Joshua Bardwell
- Mono-plate arms for enhanced rigidity and reduced weight
- Constructed with high-quality Lumenier components
- Compatible with O3, O4, and analog camera mounts
- Lightweight design optimized for sub-250g builds
- Durable aluminum FPV camera side plates
ARM MONO PLATE
The QAV-S 2 Sub-250 Joshua Bardwell Special Edition is truly unique, featuring 3.5mm thick arms paired with an Arm Mono plate. Weighing just 55g (frame only, without accessories), this design strikes an industry-leading balance between lightweight construction and durability, perfect for even the most demanding applications. The Arm Mono plate enhances rigidity while keeping the configuration light.
ALUMINUM CAMERA PLATES
The Lumenier QAV-S2 Sub-250 Joshua Bardwell frame kit features aluminum FPV camera side plates for enhanced protection and flexibility. It supports both HD and analog cameras, including damped mounts optimized for O3 and O4 Air Unit cameras offering endless possibilities for your setup! These plates are also backward compatible with the QAV-S 2 Bardwell 5' frame kit.
SOFT RUBBER CAMERA ISOLATION MOUNT
The Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3' frame kit features a soft rubber camera isolation mount, reducing vibrations for smoother, more stable footage when stabilizing with either on-camera stabilization (RockSteady) or software stabilization (Gyroflow).
Specifications
- Standoffs: 7075 Aluminum (Purple)
- Arm: 3.5mm 3K Carbon Fiber
- Camera Plates: Aluminum
- Screws: Steel 12.9 grade
- Frame Size: 3'
- Weight: 55g
Links
Manual
- Lumenier QAV-S 2 Sub-250 Joshua Bardwell Manual
3D Prints
- Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE Arm Guards
- Lumenier QAV-S 2 Joshua Bardwell SE Camera Damping Inserts*
- Lumenier QAV-S and QAV-S 2 (Joshua Bardwell SE and Standard) Antenna Mounts
- DJI O4 PRO 3D Printable Camera Bracket and Mount for QAV-S 2 Sub-250 Bardwell SE Frame Kit**
*The damper inserts should be printed in TPU; you can reduce the walls and infill percentage to help with damping if necessary. Machined aluminum parts will be available soon, and these same damper inserts will work with the production parts if needed.
**This mount is a drop-in replacement for the camera cage on the Bardwell edition of the Lumenier QAV-S 2. The camera cage portion should be printed in something stiff and tough, like nylon or carbon fiber nylon. PAHT-CF is a great choice if you can print it. This mount was also tested in PETG-CF, and it works decently. These are printed parts, though, so remember that durability will suffer compared to machined aluminum parts.
Recommended (Not Included)
- Lumenier Camera Adapter Plates for DJI O4 Air Unit (2pcs) - Offset
Includes
- Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3” - Frame Kit
- 1x Bardwell QAV-S 2 Sub-250 Split Plate Front 1.5mm
- 1x Bardwell QAV-S 2 Sub-250 Split Plate Rear 1.5mm
- 1x Bardwell QAV-S 2 Sub-250 Rear Antenna Mount
- 4x Bardwell QAV-S 2 Sub-250 3-Inch Arm 5mm
- 1x Bardwell QAV-S 2 Sub-250 Top Plate 1.5mm
- 1x Bardwell QAV-S 2 Sub-250 Battery Pad
- 1x Lumenier Battery Strap 10x180mm
- 1x Lumenier O3 Adapter M2 - 20x20
- 1x FPV Camera Mount Right
- 1x FPV Camera Mount Left
- 2x Soft Rubber Dampers
- 2x 3D Printed Dampers
- 4x Knurled Standoff
- 1x Hardware Kit
This Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3' Frame Kit is a must-have for Freestyle FPV enthusiasts. With a 3' frame size and weighing just 55g, it's lightweight and ready for high-speed maneuvers. Compatible with DJI O3, O4 Air Unit or Walksnail systems (sold separately), it offers great versatility. Build your own FPV drone with the included hardware and step-by-step guide by Joshua Bardwell.
