The Matek F405-WMN is a must-have for wing flight enthusiasts! It's INAV ready, packed with features, and has plenty of UARTS and 12 PWM output channels.
Check out our Fixed Wing collection and all of our Matek Products!
Features
• Space-saving design: Measures just 31x26x16mm, perfect for builds where space is a premium.
• All-in-one functionality: Combines all the features of a full-size board in a tiny package.
• Versatile connectivity: 5x UARTs, 1x Softserial_Tx option(INAV), 12x PWM outputs, 1x I2C, 3x ADC (VBAT, Current, RSSI), 1x spare PINIO, USB/Beep Extender with Type-C(USB2.0), built in inverter on UART2-RX for SBUS input, switchable dual camera inputs.
Specifications
FC Specifications
- MCU: STM32F405RGT6, 168MHz, 1MB Flash
- IMU: ICM42688-P
- Baro: SPL06-001
- OSD: AT7456E
- Blackbox: 16M Flash
- 5x UARTs, 1x Softserial_Tx option(INAV)
- 12x PWM outputs
- 1x I2C
- 3x ADC (VBAT, Current, RSSI)
- 1x spare PINIO
- USB/Beep Extender with Type-C(USB2.0)
- Built in inverter on UART2-RX for SBUS input
- Switchable Dual Camera Inputs
Power
- 6~30V DC IN (2~6S LiPo)
- 132A Current Sense (INAV Scale 250, ArduPilot 40A/V)
- PDB/Current sense resistor: 90A continuous, 132A burst.
- BEC 5V 1.5A for FC & Peripherals
- BEC Vx 5A for servos, 5V/ 6V option
- Vbat for VTX and camera
- LDO 3.3V 200mA
- Battery Voltage Sensor: 1k:20k
FC Firmware
- ArduPilot: MatekF405-TE
- INAV: MATEKF405TE (INAV 5.0 or newer)
Physical
- Dimensions: 31 x 26 x 16.5 mm
- Mounting: 22 x 22mm, ¦µ2mm
- Weight: 10g
Includes
- 1x Matek F405-WMN Flight Controller
- 1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
- Dupont 2.54 pins (Board is shipped unsoldered)
Wiring
The Matek F405-WMN Flight Controller is perfect for wing flight enthusiasts looking to save space and weight on their builds. Measuring just 31x26x16.5 mm and weighing 10g, it packs all the features of a full-size board into a tiny package. With 5x UARTs, 12x PWM outputs, and more, it offers versatile connectivity. It's INAV ready and compatible with ArduPilot. Comes with a USB(Type-C)/Beep Extender and Dupont 2.54 pins (unsoldered).
