A Revolutionary Cinewhoop Design
Tired of heavy ducted cinewhoop frames? Look no further! Our CinemAh Frame is here to change the game.
The Lightweight Wonder
The CinemAh frame is super lightweight and built for full GoPro action. Its unique all-carbon fiber structure gives maximum strength while making electronics easy to access.
Unbeatable Versatility
With 4 built-in angles for quick GoPro adjustment and 2xM2 mounting holes, it's a cinch to set up for any shoot. Plus, it comes with a set of carbon fiber parts and hardware.
Electronics Mounting Made Easy
- 2 sets of 1x1inch mounting locations
- Front 20x20 location has M3 mounting for a flight controller and ESC stack.
- Rear 20x20 location has M2 mounting for Caddx Vista – with rear antenna mount.
- Camera mounting – single and double screw camera mounting options.
- Note: The frame does not fit an air unit.
Motor Mounting Simplified
- 12mm diameter, 4-hole pattern
- Suggested Motors: 14xx – 20xx
Propeller Perfection
Weight Details
- 78g with Adjustable GoPro Hero8 mount and motor screws
- 68g without GoPro Hero 8 mount
- Downloadable 3D printed TPU snap-in ducts (x4) weigh 24g total – 6g each duct
Recommended Parts
- Stack: NewBeeDrone Infinity200 or Cricket200
- Motors: NewBeeDrone Flow 1408 4150KV
- DJI FPV System: CaddX Vista with DJI Camera
- Battery: GNB 1300-1350mAh 4s Lipo
- Propellers: Gemfan Ducted Durable 5 Blade 76mm
- GoPro Hero 8 and Hero 9 Mount
Get your 3D prints here!
3D Printed Parts Files
3D Printed Parts Design by Third party
Caddx Peanut Mount by Jason Suter. Thank you Jason!!
Link to manual.
We have both 4S and 6S tune by using the parts above, this tune is under betaflight firmware 4.2.X. if you are using 4.2.x you can directly copy the text and go to CLI commend to paste. it will auto save to your PID and Filter profile setting. Profile 1 is for 6S setup, Profile 2 is for 4S setup, Please make sure you choose the right PID profile on the setting to match your drone configuration. This PID will also works for any flight controller are under betaflight 4.2.x version, as long as the flight controller is using MPU6000 gyro. The text document I provide below only contain the PID and Filter data for 3 different profile. It will not change any other settings on your flight controller.
Link
Build Video:
The NewBeeDrone CinemAh Frame is a lightweight and versatile cinewhoop frame designed for videographers and drone enthusiasts. It's perfect for capturing smooth, high-quality footage with a full GoPro. The frame features a unique all-carbon fiber structure for maximum strength and easy access to electronics. It has 4 built-in angles for quick GoPro adjustment and 2xM2 mounting holes for easy setup. With 2 sets of 1x1inch mounting locations, front and rear 20x20 locations for electronics, and a 12mm diameter, 4-hole pattern for motor mounting, it's a breeze to install components. Propellers are 3inch or 76mm. Weight varies: 78g with Adjustable GoPro Hero8 mount and motor screws, 68g without. Comes with 1 set of carbon fiber parts and 1 set of hardware. Recommended parts include a stack, motors, DJI FPV system, battery, propellers, and GoPro mounts.
